新聞
聯系方式
服務熱線：0531-85980985
聯系人： 寧經理 手機：13953116782 電話：15990999232 郵箱：499589624@qq.com 地址：濟南市槐蔭區清河北路11號（美里新居南門斜對面）亞德森工廠店
工作服有哪些部位是容易磨損的？
來源：http://m.jjmfefo.cn 日期：2023-01-11 發布人：
對我們生活中和工作中常穿的衣服，都容易產生損壞狀況，只不過是質量差的衣服損壞頻率和程度會比較大，那麼，除了訂制質量比較差的情況，我們常穿的濟南工作服有什么部位比較容易損壞呢？
The clothes we often wear in our life and work are easy to be damaged, but the clothes with poor quality will be damaged more frequently and to a greater extent. In addition to the poor quality of customized clothes, what parts of the Jinan work clothes we often wear are easy to be damaged?
1、衣服拉鏈
1. Clothes zipper
員工工作服的衣服拉鏈是易損壞的部位之一，市場上便宜工作服衣服拉鏈都是塑料材料，做工簡單，拉幾回就容易損壞，給工作帶來了很多不便，因而在衣服拉鏈上要做好工作，應用金屬拉鏈適合。
The zipper of employees' work clothes is one of the parts that are easy to be damaged. The zippers of cheap work clothes on the market are made of plastic materials. They are easy to be damaged after being pulled a few times, which brings a lot of inconvenience to the work. Therefore, it is necessary to do a good job on the zipper of clothes and apply metal zippers.
2、口袋
2. Pockets
腰部口袋可以說是員工應用頻繁的一個部位，口袋里常常需要裝下工作需要的零件等，口袋布料差或口袋做工過度簡單，非常容易產生口袋部位撕破，不但影響員工工作服的形象，也給工作產生不便。
The waist pocket can be said to be a part frequently used by employees. It is often necessary to put parts needed for work in the pocket. The poor fabric of the pocket or the excessively simple workmanship of the pocket are very easy to tear the pocket, which not only affects the image of employees' work clothes, but also brings inconvenience to work.
3、袖口
3. Cuff
濟南工作服的袖口在工作時常常與下機械設備等摩擦，因而袖口要經得起耐磨損，布料要品質好，縫紉工藝盡可能選用廣泛運用的反包邊雙線縫紉工藝，做工，走線嚴密，這樣才可以結實耐磨損。
The cuffs of Jinan work clothes often rub with the lower machinery and equipment during work, so the cuffs should withstand wear and tear, and the fabric should be of good quality. The sewing process should use the widely used reverse binding double-thread sewing process as far as possible, with fine workmanship and tight wiring, so as to be strong and wear resistant.
4、下擺緊松
4. The hem is tight and loose
長時間應用后，上衣下擺非常容易松馳，因而在下擺設計上，應用雙車下擺設計，松緊程度適度，給員工舒服的穿著體驗，又能長時間穿著不易松馳。
After a long time of application, the top hem is very easy to loosen, so in the hem design, the double-car hem design is applied, the tightness is moderate, giving employees a comfortable wearing experience, and can wear it for a long time without loosening.
上述是濟南工作服比較容易損壞的部位，要不然便是應用比較頻繁，否則便是接觸比較多，因此我們在后續制做和應用的過程上都要多加注意，尤其注意那些應用頻繁、摩擦較多的部位，才可以保持其應用長久。更多相關內容就來我們網站http://m.jjmfefo.cn咨詢了解吧！
These are the parts of Jinan work clothes that are easy to be damaged, or they are frequently used, or they are frequently contacted. Therefore, we should pay more attention to the subsequent manufacturing and application process, especially those parts that are frequently used and have more friction, so as to maintain their long-term application. Come to our website for more relevant content http://m.jjmfefo.cn Ask about it!
上一條：不同面料工作服的清洗和烘干方法 | 下一條：職業裝的褪色問題需要提前預防！
資訊MORE+
- 濟南企業定制夏季工作服：不只是“清涼”，更是“生產力”的秘密武器 2025-06-16
- 濟南服裝廠制作衣服有那些流程？ 2025-06-14
- 濟南工作服：打造專屬形象，提升團隊凝聚力 2025-06-13
- 濟南服裝廠生產車間標準體系解析 2025-06-12
- 濟南服裝廠面對不同的衣服是怎么控制好每個步驟的？ 2025-06-11
- 濟南特殊工作服防燃，防靜電怎么做到的？ 2025-06-10
- 濟南工作服馬甲制作全流程解析：從設計到成衣的技術 2025-06-09
- 濟南工作服廠服裝生產全流程解析：從面料到成衣的質量把控 2025-06-07
- 濟南職業裝：齊魯風韻與現代職場的融合演繹 2025-06-06
- 濟南工作服生產中的版型與數量精準管控全流程解析 2025-06-05
- 工作服選購指南：如何挑到既省錢又耐穿的好衣服 2025-06-04
- 帶你了解濟南服裝廠家生產過程環節 2025-06-03
- 講解酒店制服工藝流程有什么要點 2025-05-27
- 在濟南定制工作服時是不是遇到這些問題，看看對應的問題怎么解決 2025-05-26
- 工作服性價比密碼：花小錢穿出「耐造 + 實用 + 好看」，打工人想要這樣的！ 2025-05-22
- 服裝定制校服需關注六大核心維度 2025-05-20
- 定制工作服馬甲時，怎么做到又能提升企業形象，又能提升員工體驗？ 2025-05-19
- 通信工程師工裝工具掛載有哪些優化？ 2025-05-16
- 濟南工作服：短袖的制作方法 2025-05-14
- 帶你了解濟南服裝廠裁剪的工序和裁制環節 2025-05-12
